Welcome to the Ford Source .com - The online Ford Racing Parts Store

Ford Racing Parts - Tools Performance Parts

4WD LOCKNUT SOCKET SET

For removal and installation of axle locknuts on Ford Trucks Kit contains 5 sockets with 1/2" square drive and FWD front spindle puller Spindle puller fits spindle thread sizes 2"–16, 1-5/8"–16, and 38 mm–1.5 Fits high-shear rotating nuts on 1985–newer F-250 and F-350 truck rear axles, and Dana 80 rear axles of Ford Super Duty trucks Fits front axle locknuts on 1986–newer F-Series 1/2-ton trucks, full-size Bronco with Dana 44 axle, 1984-92 Ranger, and Bronco II with manual hubs Fits front axle locknuts on 1978-84 F-Series 4WD heavy-duty /4- and 1-ton trucks Fits front axle locknuts on 1993–newer Ranger, Bronco II, and  Explorer with manual hubs. 1995–newer F-Series 1/2-, 3/4- and 1-ton trucks and full-size Bronco with manual hubs. 1959-85 F-Series 1/2- and 3/4-ton trucks and full-size Bronco with manual hubs

 M-1197-T4543

$50.00


REAR AXLE AND BEARING PULLER

Kit includes slide hammer and attachments for removing rear axles

M-4006-T6540

$125.00
NEW LOWER PRICE


BRAKE CALIPER PIN REMOVAL TOOL

This tool is the damage-free way to remove caliper pins from 1986-88 E- and F-Series, 1983-88 Ranger and 1984-88 Bronco II

M-2300-T7299

$13.00
NEW LOWER PRICE


DIFFERENTIAL HOUSING SPREADER TOOL

Simplifies the removal and installation of ring and pinion gears and differential assemblies Spreads the differential housing on 7.5", 8.8" and Dana 30 through 70 axle housings Highly recommended on Cobra aluminum 8.8" IRS housings Helps prevent component damage that often results from using “homemade” devices

M-4010-T7071

$295.00
NEW LOWER PRICE


REAR DISC CALIPER RETRACTION TOOL

Use to properly retract the caliper piston when changing brake pads in vehicles with rear disc brakes equipped with internal parking brake mechanism Universal kit fits most Fords, some GMs and others

M-2588-T7317

$62.00
NEW LOWER PRICE


EXHAUST HANGER REMOVAL TOOL

Unique pliers for removing push-through exhaust hangers from rubber isolating blocks Makes it easy to change factory and Ford Racing exhaust systems

M-5230-T7677

$38.00
NEW LOWER PRICE


PINION AND DIFFERENTIAL BEARING PULLER

Enables you to remove pinion bearings and carrier bearings on RWD and 4WD differentials Allows damage-free removal of bearings For use on Ford 6.75", 8.5", 8.7", 9" and Dana 28, 30, 35, 44, 50, 60, 70, 70HD and 80 differentials Also fits many other applications

M-4209-T7794

$375.00
NEW LOWER PRICE


MODULAR ENGINE CAM TIMING TOOL KIT

Includes 3 cam positioning tools and 1 cam holding tool For use on all modular 4.6L and 5.4L V-8 and 6.8L V-10 engines Includes molded storage case

M-6256-T6487

$123.00


CRANKSHAFT POSITIONING TOOL 

For use on 1993 and newer modular 4.6L 2V and 4V, 5.4L 2V and 4V, and 6.8L V-10 engines Should be used in conjunction with cam alignment tool M-6303-T6024 Necessary to eliminate valve to piston interference during disassembly and assembly

M-6303-T6024

$95.00
NEW LOWER PRICE


FUEL PRESSURE GAUGE TOOL

Includes adapter for Schrader valve and 4 fittings Allows you to check fuel pressure and fuel volume Professional quality

M-9593-T6551

$285.00


FUEL PRESSURE GAUGE TOOL WITH HOSES

Includes 30" pressure hose and 6' bleed hose Includes fittings and 0-100 PSI easy-to read 3-1/2" diameter pressure gauge Professional quality

M-9593-T7211

$95.00


FUEL INJECTOR CLEANER

The most effective method of cleaning fouled injectors Connects to your shop’s pressurized air supply Includes gauge, 72" hose, underhood hanger and instruction manual

M-9593-T7448

$185.00


FUEL LINE DISCONNECT TOOL

Easily disconnects spring lock fuel line fittings Spring loaded and durable The design encloses the line to help deflect spray during  disassembly

M-9280-T7337

$13.00


CLUTCH COUPLING TOOL FOR 1988 AND NEWER TRUCKS

Disconnects hydraulic clutch line from hydraulic slave cylinder Works on 1988–present F-Series, Bronco, Bronco II, Ranger and Explorer Works on 1989-97 Thunderbird and Cougar

M-7553-T7646

$6.25
NEW LOWER PRICE


PILOT BEARING PULLER TOOL

Designed to pull pilot bearings in areas a slide hammer will not fit Fits 1/2" to 1-1/2" ID

M-7600-T7318

$92.00


TRANSMISSION LINE DISCONNECT TOOL KIT

Kit contains 2 tools Disconnect tools for transmission quick-connect fittings on most late model Fords Releases the finger on the transmission to radiator oil cooler line without damaging the hose or connector Works on some oil cooler lines also

M-9500-T7798

$51.00


POWER STEERING PULLEY REMOVER/INSTALLER

Kit contains necessary tools for removal and installation of power steering pump pulleys on most Ford vehicles Also works on many non-Ford vehicles

M-10300-T7830

$95.00


AIR CONDITIONING DISCONNECT TOOLS

Quickly separates spring lock refrigerant lines and some spring lock fuel rail couplings Set of four: white, red, blue and black

M-19623-T7238

$18.00


FORD RACING FENDER COVER

Protect that beautiful paint job from scratches, chemicals and oil with this strong, sturdy and slip-resistant “Ford Racing” fender  cover. Measures 27" x 36" and is acid- and grease-resistant. Features handy “ridged” area in which to place small tools and parts.

M-1822-A2

$9.95

 

*Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part.

 


Home | Search | FAQ's | Customer Service | Terms

 


Downs Ford, Inc.
TheFordSource.com
360 Hwy 37 East
Toms River, NJ 08753
1-800-757-6909
©1996-2008