Fits 2008-09 Mustang GT with MANUAL transmission. Does not fit 2007 or prior Mustang GT.
Produces 550 hp at 6000 RPM with 93 octane at approximately 11 psi of boost!
Produces 542 lb-ft of torque at 4400 RPM
Kit includes intake manifold supercharger, drive belt, and all other accessories for installation of the supercharger.
Includes Pro-Cal tool voucher with kit
Premium fuel required
Similar to 400 hp kit but with smaller pulley, complete air to liquid intercooler system and dual fuel pump, fuel pump driver, and harness
Due to multiple calibrations, online registration is required to receive Pro-Cal tool after purchase.

E.O. #D-231-28
Engine calibrations are developed and supported for U.S. and Canadian vehicles only 
FREE SHIPPING WITHIN THE 48 STATES 

$6720.00

Black Wrinkle Finish Fits 5.4L DOHC 2007-08 SVT Mustang 105 hp increase over stock (605 hp vs. 500 hp), 90 lb-ft increase in torque over stock (570 lb-ft vs. stock 480 lb-ft) using correction factor SAE J1349 2.3L Twin Vortices Series Eaton supercharger features 4-lobe 160 degree twist rotors Includes open element cold air intake system Includes Pro-Cal tool voucher with kit Engineered by Roush for Ford Racing Premium fuel required Available as part of Shelby Super Snake Package 2007 SVT Mustangs must use upgraded damper M-6312-SVT (see www.fordracingparts.com) to maintain warranty coverage DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE E.O. # Pending

$4925.00

Fits 2008-2009 Mustang GT with MANUAL or AUTOMATIC transmission

M-6066-M463V8

See www.fordracingparts.com for other year applications
Produces 400 hp with 93 octane at approximately 5 psi of boost
Kit includes intake manifold supercharger, drive belt, and all other accessories for installation of the supercharger
Includes Pro-Cal tool voucher with kit
Premium fuel required
Due to multiple calibrations, online registration is required to receive Pro-Cal tool after purchase.
E.O. #D-231-24

Engine calibrations are developed and supported for U.S. and Canadian vehicles only 

$5153.00

$5385.00

$5600.00

$5385.00

$5032.00

$2425.00

$2475.00

$6695.00

$7095.00

Fits 2007 Mustang GT with MANUAL transmission ONLY See www.fordracingparts.com for 2008 manual transmission applications Produces 500 hp at 5800 rpm with 93 octane at approximately 11 psi of boost! Produces 470 lb-ft of torque at 4200 rpm Kit includes intake manifold supercharger, drive belt and all other accessories for installation of the supercharger Includes Pro-Cal tool voucher with official Ford Racing calibration Premium fuel required DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE Similar to 400 hp kit but with smaller pulley, complete air to liquid intercooler system and dual fuel pump, fuel pump driver and harness E.O. #D-231-24 Engine calibrations are developed and supported for U.S. and Canadian vehicles only NOTE: Superchargers are built to order. Please allow 7 days for assembly.  

$6695.00

Fits 2007 Mustang GT with MANUAL transmission ONLY See www.fordracingparts.com for 2008 manual transmission applications Produces 500 hp at 5800 rpm with 93 octane at approximately 11 psi of boost! Produces 470 lb-ft of torque at 4200 rpm Kit includes intake manifold supercharger, drive belt and all other accessories for installation of the supercharger Includes Pro-Cal tool voucher with official Ford Racing calibration Premium fuel required DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE Similar to 400 hp kit but with smaller pulley, complete air to liquid intercooler system and dual fuel pump, fuel pump driver and harness E.O. #D-231-24 Engine calibrations are developed and supported or U.S. and Canadian vehicles only NOTE: Superchargers are built to order. Please allow 7 days for assembly. 

$6900.00

DESIGNED FOR USE WITH FACTORY TWIN-BORE THROTTLE BODY! Kit includes supercharger, supercharger inlet, manifold adapter plate and hardware kit Does not require PCM, fuel pump or MAF meter upgrades Simple bolt-on increase at the rear wheels of 85 horsepower and 50 lb-ft of torque Installation of this kit will void your new vehicle engine warranty NOTE: Superchargers are built to order. Please allow 7 days for assembly.

$3381.99

Same as M-6066-CT46, but polished DESIGNED FOR USE WITH FACTORY TWIN-BORE THROTTLE BODY! Kit includes polished supercharger and supercharger inlet, manifold adapter plate and hardware kit Does not require PCM, fuel pump or MAF meter upgrades Simple bolt-on increase at the rear wheels of 85 horsepower and 50 lb-ft of torque Installation of this kit will void your new vehicle engine warranty NOTE: Superchargers are built to order. Please allow 7 days for assembly.

$3657.00

Dress up your 2003-04 Mustang Cobra with this brushed stainless steel pulley cover Features a laser-cut Cobra snake for a striking appearance! Easy to install, direct replacement for production pulley cover

$199.00

Fits all 2004 F-150 with 5.4L 3-valve engine Complete kit contains all hardware and detailed instructions Intercooled system Premium fuel only Designed for use with factory throttle body 95 mm mass air meter DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE Pro-Cal tool voucher included with kit Simple bolt-on rear wheel increase of approximately 160 horsepower and 160 lb-ft of torque Installation of this kit will void your new vehicle powertrain  warranty E.O. #D-231-24 Engine calibrations are developed and supported for U.S. and Canadian vehicles only NOTE: Superchargers are built to order. Please allow 7 days for assembly

$4920.99

Fits all 2004 F-150 with 5.4L 3-valve engine Complete kit contains all hardware and detailedM-6066-F104P instructions Intercooled system Premium fuel only Designed for use with factory throttle body 95 mm mass air meter DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE Pro-Cal tool voucher included with kit Simple bolt-on rear wheel increase of approximately160 horsepower and 160 lb-ft of torque Installation of this kit will void your new vehicle powertrain  warranty E.O. #D-231-24 Engine calibrations are developed and supported for U.S. and Canadian vehicles only NOTE: Superchargers are built to order. Please allow 7 days for assembly

$5395.99

Fits all 2005-07 F-150 with 5.4L 3-valve engine Complete kit contains all hardware and detailed instructions Intercooled system Premium fuel only Designed for use with factory throttle body 95 mm mass air meter DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE Pro-Cal tool voucher included with kit Simple bolt-on rear wheel increase of approximately 160 horsepower and 160 lb-ft of torque Installation of this kit will void your new vehicle powertrain  warranty E.O. #D-231-24 Engine calibrations are developed and supported for U.S. and Canadian vehicles only NOTE: Due to calibration complexity this supercharger will not fit 2007-08 Expedition or the 2008 F-150 NOTE: Superchargers are built to order. Please allow 7 days for assembly

$5025.00

Fits all 2005-07 F-150 with 5.4L 3-valve engine Complete kit contains all hardware and detailed instructions Intercooled system Premium fuel only Designed for use with factory throttle body 95 mm mass air meter DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE Pro-Cal tool voucher included with kit Simple bolt-on rear wheel increase of approximately 160 horsepower and 160 lb-ft of torque Installation of this kit will void your new vehicle powertrain  warranty E.O. #D-231-24 Engine calibrations are developed and supported for U.S. and Canadian vehicles only NOTE: Due to calibration complexity this supercharger will not fit 2007-08 Expedition or the 2008 F-150 NOTE: Superchargers are built to order. Please allow 7 days for assembly

$5395.99

Fits 1999-2000 F-150 Lightning Complete kit contains all hardware and detailed instructions Premium fuel only Designed for use with factory twin bore throttle body 90 mm mass air meter DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE Pro-Cal tool voucher included with kit Simple bolt-on increase of approximately 80 horsepower and 80 lb-ft of torque Installation of this kit will void your new vehicle powertrain  warranty E.O. #D-231-24 Engine calibrations are developed and supported for U.S. and Canadian vehicles only NOTE: Superchargers are built to order. Please allow 7 days for assembly

$3847.00

Fits 1999-2000 F-150 Lightning Complete kit contains all hardware and detailed instructions Premium fuel only Designed for use with factory twin bore throttle body 90 mm mass air meter DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE Pro-Cal tool voucher included with kit Simple bolt-on increase of approximately 80 horsepower and 80 lb-ft of torque Installation of this kit will void your new vehicle powertrain  warranty E.O. #D-231-24 Engine calibrations are developed and supported for U.S. and Canadian vehicles only NOTE: Superchargers are built to order. Please allow 7 days for assembly

$4208.49

Fits 2001-04 F-150 Lightning Complete kit contains all hardware and detailed instructions Premium fuel only Designed for use with factory twin bore throttle body DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE Pro-Cal tool voucher included with kit Simple bolt-on increase of approximately 80 horsepower and 80 lb-ft of torque Installation of this kit will void your new vehicle powertrain  warranty E.O. #D-231-24 Engine calibrations are developed and supported for U.S. and Canadian vehicles only NOTE: Superchargers are built to order. Please allow 7 days for assembly

$3799.99

Fits 2001-04 F-150 Lightning Complete kit contains all hardware and detailed instructions Premium fuel only Designed for use with factory twin bore throttle body DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE Pro-Cal tool voucher included with kit Simple bolt-on increase of approximately 80 horsepower and 80 lb-ft of torque Installation of this kit will void your new vehicle powertrain  warranty E.O. #D-231-24 Engine calibrations are developed and supported for U.S. and Canadian vehicles only NOTE: Superchargers are built to order. Please allow 7 days for assembly

$4170.49

This conversion kit is required to install M-6066-F105 supercharger  on 2005-06 Expeditions with 5.4L 3V engine Separate purchase of the M-6066-F105 supercharger kit is required See M-6066-F105 for additional details Premium fuel required E.O. #D-231-24

$309.00