QA1Performance Suspension Parts
|
|
 |
QA1 PRO-COMP TUBULAR CONTROL ARMS
MU2TCA
1994-2004 MUSTANG 5.0-4.6
QA1's commitment to the Mustang 5.0L and 4.6L continues with these ultimate tubular control arms. They reduce unsprung weight, while improving weight distribution
|
MU2TCA* $250.00
|
|
 |
QA1 PRO-COMP TUBULAR CONTROL ARMS MU1TCA
1979-1993 MUSTANG 5.0
QA1's commitment to the Mustang 5.0L continues with these ultimate tubular control arms. They reduce unsprung weight, while improving weight distribution
|
MU1TCA*
$250.00
|
|
 |
QA1 MU175 - QA1 Mustang Suspension Parts
1979-2004 MUSTANG
Coil-Over Conversion
The Coil-Over Conversion Kit only works with QA1 Mustang Struts, and it requires QA1's caster/camber plates (#122-CC100MU). Everything else is included to convert threaded struts to coil-overs. Kit contents:
Two 175lb springs
Two 2-piece upper spring caps with bearings
Two spring seats
Two spring seat jam nuts and washers
The Coil-Over Hardware Kit for two QA1 Mustang Struts includes spring caps, seats, and washers.
|
MU175*
$170.00
|
|
 |
QA1 ECONO-COMP TUBULAR CONTROL ARMS MU1ESA
1979-1993 MUSTANG 5.0
QA1's commitment to the Mustang 5.0L and 4.6L continues with these ultimate tubular control arms. They reduce unsprung weight, while improving weight distribution
|
MU1ESA*
$145.00
|
|
 |
QA1 ECONO-COMP TUBULAR CONTROL ARMS MU3ESA
1979-1993 MUSTANG 5.0
QA1's commitment to the Mustang 5.0L and 4.6L continues with these ultimate tubular control arms. They reduce unsprung weight, while improving weight distribution
These arm's are designed to be used with a MU2TK 79-95 Fox Body Style but with SN95 Ball joints. Will not work with stock ball joints for 79-95
|
MU3ESA*
$145.00
|
|
 |
QA1 TC2501P - QA1 Stocker Star Adjustable Shock
The Stocker Star Adjustable Shocks feature easy bolt-in installation in the stock mounting locations. The Deflective Disc Valving Technology gives these shocks increased valving response, control and consistency. Gone are the days of removing the shock to adjust valving because you can adjust the Stocker Stars with just the turn of a knob while they are mounted on the car. A 5/8'' centerless ground, hard chrome piston provides increased durability and eliminates piston rod flex. The machined, forged aluminum body is lightweight and stronger than billet. The body is bright anodized for unmatched durability, ease of maintenance and show winning appearance. The Stocker Stars also feature a three step sealing system that uses aerospace material and an exclusively engineered double lip seal with wiper to eliminate seal drag and dirt intrusion. Each shock is 100% dyno tested and serialized to assure consistency in production and performance. The bushing material is exclusive to QA1 shocks and all mounting hardware is either zinc or chrome plated for durability and professional appearance. They also use an exclusive nylon race bearing for smooth, bind-free operation. The Stocker Star Shocks are
revalvable and able to be rebuilt by a QA1 authorized service
center.
|
TC2501P*
$119.00 each
|
|
 |
QA1 TC1610P - QA1 Stocker Star Adjustable Shock
The Stocker Star Adjustable Shocks feature easy bolt-in installation in the stock mounting locations. The Deflective Disc Valving Technology gives these shocks increased valving response, control and consistency. Gone are the days of removing the shock to adjust valving because you can adjust the Stocker Stars with just the turn of a knob while they are mounted on the car. A 5/8'' centerless ground, hard chrome piston provides increased durability and eliminates piston rod flex. The machined, forged aluminum body is lightweight and stronger than billet. The body is bright anodized for unmatched durability, ease of maintenance and show winning appearance. The Stocker Stars also feature a three step sealing system that uses aerospace material and an exclusively engineered double lip seal with wiper to eliminate seal drag and dirt intrusion. Each shock is 100% dyno tested and serialized to assure consistency in production and performance. The bushing material is exclusive to QA1 shocks and all mounting hardware is either zinc or chrome plated for durability and professional appearance. They also use an exclusive nylon race bearing for smooth, bind-free operation. The Stocker Star Shocks are
revalvable and able to be rebuilt a by QA1 authorized service centers.
|
TC1610P*
$119.00 each
|
|
|
QA1 TC1574P Stocker Star Adjustable Shock
The Stocker Star Adjustable Shocks feature easy bolt-in installation in the stock mounting locations. The Deflective Disc Valving Technology gives these shocks increased valving response, control and consistency. Gone are the days of removing the shock to adjust valving because you can adjust the Stocker Stars with just the turn of a knob while they are mounted on the car. A 5/8'' centerless ground, hard chrome piston provides increased durability and eliminates piston rod flex. The machined, forged aluminum body is lightweight and stronger than billet. The body is bright anodized for unmatched durability, ease of maintenance and show winning appearance. The Stocker Stars also feature a three step sealing system that uses aerospace material and an exclusively engineered double lip seal with wiper to eliminate seal drag and dirt intrusion. Each shock is 100% dyno tested and serialized to assure consistency in production and performance. The bushing material is exclusive to QA1 shocks and all mounting hardware is either zinc or chrome plated for durability and professional appearance. They also use an exclusive nylon race bearing for smooth, bind-free operation. The Stocker Star Shocks are
revalvable and able to be rebuilt a by QA1 authorized service centers.
|
TC1574P*
$119.00 each
|
|
|
QA1 TC1540P Stocker Star Adjustable Shock
The Stocker Star Adjustable Shocks feature easy bolt-in installation in the stock mounting locations. The Deflective Disc Valving Technology gives these shocks increased valving response, control and consistency. Gone are the days of removing the shock to adjust valving because you can adjust the Stocker Stars with just the turn of a knob while they are mounted on the car. A 5/8'' centerless ground, hard chrome piston provides increased durability and eliminates piston rod flex. The machined, forged aluminum body is lightweight and stronger than billet. The body is bright anodized for unmatched durability, ease of maintenance and show winning appearance. The Stocker Stars also feature a three step sealing system that uses aerospace material and an exclusively engineered double lip seal with wiper to eliminate seal drag and dirt intrusion. Each shock is 100% dyno tested and serialized to assure consistency in production and performance. The bushing material is exclusive to QA1 shocks and all mounting hardware is either zinc or chrome plated for durability and professional appearance. They also use an exclusive nylon race bearing for smooth, bind-free operation. The Stocker Star Shocks are
revalvable and able to be rebuilt a by QA1 authorized service centers.
|
TC1540P*
$119.00 each
|
|
 |
Race Performance Front QA1 Struts
Front Strut 1979-1993 Mustang 5.0
Part #: H2001
|
H2001*
$225.00 each
|
|
 |
QA1 PROACTIVE SYSTEM WITH ECONO BUSHING ARMS
Coil-Over Conversion
The Coil-Over Conversion Kit only works with QA1 Mustang Struts, and it requires QA1's caster/camber plates (#122-CC100MU). Everything else is included to convert threaded struts to coil-overs. Kit contents:
Two 175lb springs
Two 2-piece upper spring caps with bearings
Two spring seats
Two spring seat jam nuts and washers
The Coil-Over Hardware Kit for two QA1 Mustang Struts includes spring caps, seats, and washers.
Eco-Comp Tubular Control Arms
Eco-Comp Tubular Control Arms are an economical choice for street and strip. They are built with QA1's exclusive compressed rubber bushings and engineered for performance.
Pro-Comp Tubular Control Arms
These control arms use QA1's exclusive heat-treated chromoly, Teflon/Kevlar-lined, XM Rodends. Spacers are included to allow forward and backward arm movement for wheelbase adjustment.
Tubular K-Members
Designed to reduce weight (up to 28 pounds), increase strength, improve geometry, and bolt-in as
a factory swap, QA1's Tubular K-Members' mounting points have been digitally indexed from new factory pieces. Other highlights include: greater header and oil pan clearances for easier installation and maintenance; improved bump steer, anti-dive, and Ackerman angles for maximum performance; black
powder coating for durability; and the use of stock or aftermarket A-arms. When using coil-over kits, the spring perches are removable for even more weight savings.
Pro-Active Systems
So, put all the parts together, and what do you get? QA1 Pro-Active Systems.
Offered with bushing or rodend-mounted control arms, each one-stop-shop system includes a coil-over conversion kit, struts, caster/camber plates, tubular control arms, and a tubular K-member.
PICTURE SHOWN IS WITH ROD ENDS NOT ECONO BUSHING ARMS
Please leave contact number to confirm year of vehicle and spring rate!
|
PROACTECONO*
$1169.00
|
|
|
QA1 PROACTIVE SYSTEM WITH ROD END ARMS
Coil-Over Conversion
The Coil-Over Conversion Kit only works with QA1 Mustang Struts, and it requires QA1's caster/camber plates (#122-CC100MU). Everything else is included to convert threaded struts to coil-overs. Kit contents:
Two 175lb springs
Two 2-piece upper spring caps with bearings
Two spring seats
Two spring seat jam nuts and washers
The Coil-Over Hardware Kit for two QA1 Mustang Struts includes spring caps, seats, and washers.
Eco-Comp Tubular Control Arms
Eco-Comp Tubular Control Arms are an economical choice for street and strip. They are built with QA1's exclusive compressed rubber bushings and engineered for performance.
Pro-Comp Tubular Control Arms
These control arms use QA1's exclusive heat-treated chromoly, Teflon/Kevlar-lined, XM Rodends. Spacers are included to allow forward and backward arm movement for wheelbase adjustment.
Tubular K-Members
Designed to reduce weight (up to 28 pounds), increase strength, improve geometry, and bolt-in as
a factory swap, QA1's Tubular K-Members' mounting points have been digitally indexed from new factory pieces. Other highlights include: greater header and oil pan clearances for easier installation and maintenance; improved bump steer, anti-dive, and Ackerman angles for maximum performance; black powdercoating for durability; and the use of stock or aftermarket A-arms. When using coil-over kits, the spring perches are removable for even more weight savings.
Pro-Active Systems
So, put all the parts together, and what do you get? QA1 Pro-Active Systems.
Offered with bushing or rodend-mounted control arms, each one-stop-shop system includes a coil-over conversion kit, struts, caster/camber plates, tubular control arms, and a tubular K-member.
Please leave contact number to confirm year of vehicle and spring rate!
|
PROACTRODEND*
$1269.00
|
|
 |
QA1 REAR SHOCK MU7855P
The Stocker Star Adjustable Shocks feature easy bolt-in installation in the stock mounting locations. The Deflective Disc Valving Technology gives these shocks increased valving response, control and consistency. Gone are the days of removing the shock to adjust valving because you can adjust the Stocker Stars with just the turn of a knob while they are mounted on the car. A 5/8'' centerless ground, hard chrome piston provides increased durability and eliminates piston rod flex. The machined, forged aluminum body is lightweight and stronger than billet. The body is bright anodized for unmatched durability, ease of maintenance and show winning appearance. The Stocker Stars also feature a three step sealing system that uses aerospace material and an exclusively engineered double lip seal with wiper to eliminate seal drag and dirt intrusion. Each shock is 100% dyno tested and serialized to assure consistency in production and performance. The bushing material is exclusive to QA1 shocks and all mounting hardware is either zinc or chrome plated for durability and professional appearance. They also use an exclusive nylon race bearing for smooth, bind-free operation. The Stocker Star Shocks are
revalvable and able to be rebuilt by a QA1 authorized service centers.
|
MU7855P*
$119.00
|
|
 |
QA1 DOUBLE ADJUSTABLE REAR SHOCK DMU7855P
QA1 Double-Adjustable Shock DMU 7855P
The Mustang Stocker Star Rear Shock is built to handle it all, from drag to road racing to the rigors of everyday use. With 576 Valving options you can easily fine tune compression and rebound to accomplish incredible performance.
Simply the most advanced and versatile shock ever produced for the Mustang.
These shocks are revalvable and able to be rebuilt a by QA1 technicians.
|
DMU7855P*
$230.00 each
|
|
 |
QA1 MU1TK 1996-2004 MUSTANG TUBULAR K-MEMBER
MU1TK 96-04 MUSTANG
Designed to reduce weight (up to 28 pounds), increase strength, improve geometry, and bolt-in as
a factory swap, QA1's Tubular K-Members' mounting points have been digitally indexed from new factory pieces. Other highlights include: greater header and oil pan clearances for easier installation and maintenance; improved bump steer, anti-dive, and Ackerman angles for maximum performance; black
powder coating for durability; and the use of stock or aftermarket A-arms. When using coil-over kits, the spring perches are removable for even more weight savings.
|
MU1TK*
$220.00
|
|
 |
QA1 MU2TK 1979-1995 MUSTANG TUBULAR K-MEMBER
MU2TK 79-95 MUSTANG
Designed to reduce weight (up to 28 pounds), increase strength, improve geometry, and bolt-in as
a factory swap, QA1's Tubular K-Members' mounting points have been digitally indexed from new factory pieces. Other highlights include: greater header and oil pan clearances for easier installation and maintenance; improved bump steer, anti-dive, and Ackerman angles for maximum performance; black
powder coating for durability; and the use of stock or aftermarket A-arms. When using coil-over kits, the spring perches are removable for even more weight savings.
|
MU2TK*
$220.00
|
|
| *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part.
|
|
|
|
