Ford Racing
Parts - Fuel Injectors Fuel Pumps Performance Parts
|
|
|
|
 |
HIGH-FLOW RATE FUEL INJECTOR SET 39 lb./hr.
SEE SPEC SHEET
|
M-9593-M39*
$375.00
|
|
 |
HIGH-FLOW RATE FUEL INJECTOR SET 47 lb./hr.
SEE SPEC SHEET
|
M-9593-G302*
$285.00
|
|
 |
HIGH-FLOW RATE FUEL INJECTOR SET 60 lb./hr.
SEE SPEC SHEET
|
M-9593-LU60*
$400.00
|
|
 |
INJECTOR ADAPTER KIT
Adapts USCAR style harness to Jetronic/Minitimer style injector Packaged in sets of (8)
|
M-14464-U2J
$57.00
|
|
|
INJECTOR ADAPTER KIT
Adapts Jetronic/Minitimer style harness to USCAR style injector Packaged in sets of (8)
|
M-14464-A8*
$34.00
|
|
 |
MULTIPORT EFI WIRING HARNESS
Complete Harness from PCM to Injectors! Our technical support staff travels the country to dozens of various events
and takes thousands of phone calls every year. One of the most common requests regarding the Electronic Fuel Injection Wiring
Harness has come from Performance Enthusiasts requesting a cleaner appearing harness and a simpler
method to make connections. YOUR VOICE HAS BEEN HEARD! Ford Racing is committed to customer satisfaction and to meeting the
demands and requests of its customers. We have tried to be as thorough as possible in developing a
product which will provide you with the cleanest and simplest wiring harness on
the market. Some of the many new features of the MultiPort EFI Wiring Harness include:
Revised for simplified installation; uses a single connector for all required
connections Kit consists of a single harness with integral connections for injectors and O2
sensors Fully loomed, from PCM to all sensors and injectors, to save time on
installation Typical installation takes less than 1 hour Direct fit on 1986-93 302 H.O. engines
Can be easily adapted to many other Ford V-8 pushrod engines Requires PCM (not
included) from 1989-93 Mustang 5.0L H.O. Compatible with engines using both H.O. and non-H.O. firing orders
Provisions for electric fan control output Kit includes compact fuse and relay box, "Check Engine" light and all
necessary grommets For a detailed list of harness support parts, see harness instruction
sheet at fordracingparts.com
|
M-12071-A50*
$525.00
|
|
 |
MAIN HARNESS
The foundation of Ford Racing’s Multiport EFI Wiring Harness system, this harness connects the massair
flow computer to the engine, sensors and relays. 26-page instruction book included
with main harness. Contains very detailed instructions, helpful hints and lots of illustrations for easy hook-up; must
be used with integral thick film ignition module distributor.
|
M-12071-C302*
$215.00
|
|
 |
SENSOR AND RELAY PACKAGE
Sensors for use with the M-12071-A50 and M-12071-C302 wiring harness. Kit contains dual-oxygen sensors; EGR
solenoid, TAD and TAB solenoids; fuel, air-conditioning and EEC power relays. Engine-mounted
and BAP sensors NOT included.
|
M-12071-K302*
$99.00
|
|
 |
MUSTANG GT DUAL FUEL PUMP KIT
Fits 2005-2008 Mustang GT Includes harness, dual fuel pumps, drop-in housing and fuel
pump driver module from the 2007-08 SVT Mustang Includes all installation hardware
Highly recommended for any application making over 400 hp Same fuel pump kit as used in the Mustang GT 500 hp
Supercharger kit
|
M-9407-GT05
$700.00
|
|
|
MUSTANG GT DUAL FUEL PUMP KIT
Fits 2005-08 Mustang GT Includes harness, dual fuel pumps, drop-in housing
and fuel pump driver module from the 2007-08 SVT Mustang Includes all installation
hardware Highly recommended for any application making over 400 hp Same fuel pump kit as used in the
Mustang GT 500 hp supercharger kit
|
M-9407-GT05
$700.00
|
|
| *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part.
|
|
|
|
