Ford Racing
Parts - 2007-2008 SVT Packs Performance Parts
|
|
 |
2007-08 SVT MUSTANG SUPERCHARGER UPGRADE KIT
Black Wrinkle Finish Fits 5.4L DOHC 2007-08 SVT Mustang 105 hp increase over
stock (605 hp vs. 500 hp), 90 lb-ft increase in torque over stock (570 lb-ft vs. stock 480
lb-ft) using correction factor SAE J1349 2.3L Twin Vortices Series Eaton supercharger
features 4-lobe 160 degree twist rotors Includes open element cold air intake system
Includes Pro-Cal tool voucher with kit Engineered by Roush for Ford Racing
Premium fuel required Available as part of Shelby Super Snake Package 2007 SVT Mustangs must use
upgraded damper M-6312-SVT (see www.fordracingparts.com) to maintain warranty coverage
DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER
PURCHASE E.O. # Pending
|
M-6066-SGT*
$4925.00
|
|
 |
2007-08 SVT MUSTANG
POWER UPGRADE PACKAGE
For drivers who want to power up and still maintain mild street manners, the Power
Upgrade Package offers a slightly throatier exhaust note and a new mass air meter with
calibration. The result is approximately 40 horsepower! With the Power Upgrade
Package’s easy bolt-ons, it takes just an afternoon in the driveway to install. The Power
Upgrade Package includes the Ford Racing Flash Tuner to ensure proper calibration.
2007-08 SVT MUSTANG POWER UPGRADE PACKAGE Don’t settle for exaggerated dyno power or
compromised durability. Bolt on a Ford Racing Power Upgrade Package and get repeatable, safe and
SAE-proven horsepower! Improved throttle response and power under the entire curve
Fits 2007-08 SVT Mustang Standard on Shelby GT500KR 40 hp increase over stock per SAE
J1349 113 mm Cold Air Kit M-9603-SVT07 Muffler Kit M-5230-SVT1 Performance Oil
Filter Premium fuel only DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION
IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE Pro-Cal tool voucher included
with kit. 50-States Street Legal E.O. #D-418-9
|
M-2007-FR1SVT
$1350.00
|
|
 |
FORD RACING HIGH-PERFORMANCE OIL FILTER
Synthetic-Polymer/Cellulose-Fiber blend media Heavy-gauge base and canister for higher
burst strength and impulse fatigue resistance High-quality silicone anti-drain back valve
Non-stick sealing gasket for ease of installation and removal Long life with standard and
synthetic motor oils Up to 50% more filtering capacity than standard filters
Improved filtering efficiency This technology is only available through Ford Racing Performance Parts
|
M-6731-FL820
$12.50
Each
|
|
 |
2005-08 SVT MUSTANG MUFFLER SET 50 STATE
Fits 2007-08 SVT Mustang T-304 stainless construction Deeper, “throatier” exhaust note
Ford Racing embossed 3.5" polished exhaust tips 50 States drive-by noise legal
|
M-5230-SVT1
$699.00
|
|
 |
2007-08 SVT MUSTANG 113 MM COLD AIR KIT
Fits 2007-08 SVT Mustang Kit includes 113 mm Mass Air Meter Mounts in the stock
location Premium fuel only 40 hp increase over stock using correction factor SAE J1349
DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER
PURCHASE E.O. #D-418-9 See www.fordracingparts.com for the most up-to-date warranty information.
|
M-9603-SVT07
$750.00
|
|
 |
2007-08 SVT MUSTANG MUFFLER SET 49 STATE
Fits 2007-08 SVT Mustang T304 stainless construction Louder, throatier exhaust
Includes mufflers with Ford Racing embossed 3.5" tips 49-State drive-by noise legal (not legal
in California)
|
M-5230-SGT*
$644.00
|
|
 |
DRAG PACK 2007-08 SVT MUSTANG
If you feel the need for speed, get the Drag Pack from FRPP. This kit harkens back to the
days of big block Ford power and provides the modular Mustang engine with that same big
block performance. With the Drag Pack, you’ll launch harder and accelerate faster while
maintaining factory drivability. Drag racing should be conducted at enclosed, dedicated
facilities only. Fits 2007-08 SVT Mustang 113 mm Cold Air Kit M-9603-SVT07
3.73 ratio Ring and Pinion M-4209-F373N Gear Installation Kit M-4210-A Shorty Headers
M-9430-C54C Short Throw Shifter designed by Ford Racing and Hurst M-7210-B
Performance Oil Filter Premium fuel only DUE TO MULTIPLE CALIBRATIONS, ONLINE
REGISTRATION IS REQUIRED TORECEIVE PRO-CAL TOOL AFTER PURCHASE 50-States Street Legal
E.O.
#D-418-9
|
M-2007-FR2SVT
$1799.00
|
|
 |
2007-08 SVT MUSTANG SHIFTER
Fits 2007-08 SVT Mustang Standard on Shelby GT500KR Urethane body vibration
isolators 25% reduction in throw Bolts in stock location Requires reuse of production handle
and knob See www.fordracingparts.com
for the most up-to-date warranty information.
|
M-7210-B
$185.00
|
|
 |
MUSTANG 8.8 RING GEAR AND PINION SET RATIO
3.73:1 |
M-4209-F373N*
$149.00
|
|
|
MUSTANG 8.8" RING GEAR AND PINION SET RATIO 4.10:1 |
M-4209-G410A*
$149.00
|
|
 |
8.8 RING & PINION INSTALLATION KIT
Kit includes: pinion and carrier shims, crush sleeve, pinion seal, pinion nut,
ring gear bolts and cover gasket Use for changing ring and pinion gear or differential
Fits IRS
|
M-4210-A
$38.00
|
|
|
FORD RACING HIGH-PERFORMANCE OIL FILTER
Synthetic-Polymer/Cellulose-Fiber blend media Heavy-gauge base and canister for higher
burst strength and impulse fatigue resistance High-quality silicone anti-drain back valve
Non-stick sealing gasket for ease of installation and removal Long life with standard and
synthetic motor oils Up to 50% more filtering capacity than standard filters
Improved filtering efficiency This technology is only available through Ford Racing Performance Parts
|
M-6731-FL820
$12.50
each
|
|
 |
2007-08 SVT MUSTANG SHORTY HEADERS
Fits 2007-08 SVT Mustang 409 stainless steel tubes, 1 7/8" diameter with Jet-Hot® ceramic
finish Machined flange 9 lbs lighter than cast iron manifolds Bolts to stock exhaust pipes
Includes gaskets, bolts and studs |
M-9430-C54C*
$734.00
|
|
|
2007-08 SVT MUSTANG 113MM COLD AIR KIT
Fits 2007-08 SVT Mustang Kit includes 113 mm Mass Air Meter and voucher for
Pro-Cal tool with official Ford Racing calibration Mounts in the stock location
Premium fuel only DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED
TO RECEIVE PRO-CAL TOOL AFTER PURCHASE 40 hp increase over stock SAE J1349
50-States Street Legal E.O. #D-418-9 See www.fordracingparts.com for the most
up-to-date warranty information
|
M-9603-SVT07
$750.00
|
|
 |
HANDLING PACK 2007-08 SVT MUSTANG
Make your SVT Mustang a corner carving sidewinder with the added performance of the
FR3 Handling Pack Uniquely tuned exclusively to fit 2007-08 SVT Mustang Coupe
Handling Pack includes dampers (M-18000-C), lowering springs (M-5300-L), anti-roll bar kit
(M-5490-B) and strut tower brace (M-20201-C) All components are designed to
work together as a package Lowers car approximately 1.250" Dampers are adjustable
and manufactured by Dynamic Suspensions (the same company that makes dampers for the
FR500C race car) NOTE: Some factory fasteners are one-time use. Please reference
Ford service manual for reuse information and correct torque specifications.
|
M-2007-FR3SVT
$1599.00
|
|
 |
2007-08 SVT MUSTANG ANTI-ROLL BAR KIT
Anti-roll bar kit designed for increased handling and performance on 2007-08 SVT Mustang
coupe Designed to be used with M-18000-C damper kit, M-5300-L spring kit and
M-20201-C strut tower brace Includes all mouting hardware NOTE: Some factory
fasteners are one-time use. Please reference Ford service manual for reuse information and
correct torque specifications.
|
M-5490-B
$425.00
|
|
 |
2007-08 SVT MUSTANG LOWERING SPRINGS
Fits 2007-08 SVT Mustang coupe Lowers car approximately 1.25" Engineered specifically for
improved handling on 2007-08 SVT Mustang Recommended for use with M-18000-C
damper kit and M-5490-B anti-roll bar kit May cause slightly harsher ride compared to
stock springs NOTE: Some factory fasteners are one-time use. Please reference
Ford service manual for reuse information and correct torque specifications.
|
M-5300-L
$179.00
|
|
 |
2007-08 SVT MUSTANG STRUT TOWER BRACE
Fits 2007-08 SVT Mustang Black powder coated with etched Ford Racing logo Single
large diameter oval tube construction Standard on Shelby GT500KR NOTE: Some factory
fasteners are one-time use. Please reference Ford service manual for reuse information and
correct torque specifications
|
M-20201-C
$230.00
|
|
 |
2007-08 SVT MUSTANG DAMPERS KIT
Fits 2007-08 SVT Mustang Engineered specifically for improved handing on the
2007-08 SVT Mustang Single adjustment with two-way response Tuned to work with both
stock ride height and lowered 2007-08 SVT Mustangs Recommended for use with
M-5300-L spring kit, M-5490-B anti-roll bar kit and M-20201-C strut tower brace.
NOTE: Some factory fasteners are one-time use. Please reference Ford service manual for reuse
information and correct torque specifications.
|
M-18000-C
$825.00
|
|
| *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part.
|
|
|
|
