Ford Racing
Parts - 2005-2008 Mustang GT Packs
|
|
| Power Upgrade Packages
POWER UPGRADE PACKAGES
For drivers who want to power up and still maintain mild street manners, the Power Upgrade Package offers a slightly throatier exhaust note and a new
mass air meter with calibration. The result is approximately 20 horsepower!
With the Power Upgrade Package’s easy bolt-ons, it takes just an afternoon in
the driveway to install. The Power Upgrade Package includes the Ford Racing Flash Tuner to ensure proper calibration.
|
|
 |
MUSTANG POWER UPGRADE PACKAGE
Fits 2005-07 Mustang GT with manual or automatic transmission. See www.fordracingparts.com for
2008 applications Kit includes: 90 mm Cold Air Kit M-9603-GT06 Muffler Kit M-5230-GTA
Performance Oil Filter Premium fuel only DUE TO MULTIPLE CALIBRATIONS, ONLINE
REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE Pro-Cal tool
voucher included with kit Standard on the Shelby GT and GTH Approximate increase of 20
horsepower 50-States “Street Legal” (E.O. #D-598) |
M-2006-FR1
$879.00
|
|
 |
2005-08 MUSTANG GT MUFFLER SET
409 stainless body with highly polished 4.0" diameter tips Louder, throatier exhaust note
50-States drive-by noise legal (E.O. #D-598) NOTE: 409 stainless exhaust material is
titanium stabilized ferritic stainless steel. 409 stainless is used in applications where
appearance is a secondary consideration to mechanical properties and corrosion resistance and where
some weldability is required. An example of 409 stainless usage is catalytic converter assemblies.
409 stainless has excellent forming characteristics and is rust-through resistant. A surface rust
will form in most instances. This rust retards further corrosion.
|
M-5230-GTA
$340.00
|
|
 |
FORD RACING HIGH-PERFORMANCE OIL FILTER
Synthetic-Polymer/Cellulose-Fiber blend media Heavy-gauge base and canister for higher
burst strength and impulse fatigue resistance High-quality silicone anti-drain back valve
Non-stick sealing gasket for ease of installation and removal Long life with standard and
synthetic motor oils Up to 50% more filtering capacity than standard filters
Improved filtering efficiency This technology is only available through Ford Racing Performance Parts
|
M-6731-FL820
$12.50
|
|
 |
90 MM COLD AIR KIT WITH PREMIUM CAL
DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE
Fits 2005-07 Mustang GT manual or automatic transmission. See www.fordracingparts.com for 2008
applications Significant performance gains Premium fuel only Kit includes 90 mm aluminum mass air meter and
voucher for Pro-Cal tool with official Ford Racing calibration Mounts in location of stock airbox
Approximate increase of 20 hp
|
M-9603-GT06
$659.00
|
|
| DRAG PACKS |
|
 |
MUSTANG GT DRAG PACK
Manual Transmission
If you feel the need for speed, get the Drag Pack from FRPP. This kit harkens
back to the days of big block Ford power and provides the modular Mustang engine with that
same big block performance. With the Drag Pack, you’ll launch harder and accelerate faster while maintaining
factory drivability. Expect to shave 5/10ths off your 1/4-mile ETs with this kit.
Drag racing should be conducted at enclosed, dedicated facilities only. Fits 2005-07
Mustang GT with manual transmission. See www.fordracingparts.com for 2008 applications
Kit includes:
90 mm Cold Air Kit M-9603-GT06
4.10 ratio Ring and Pinion M-4209-G410A
Gear Installation Kit M-4210-A
Shorty Headers M-9430-S197C
Super Short Throw Shifter designed by Ford Racing and
Hurst M-7210-T1
Performance Oil Filter
Premium fuel only
Pro-Cal tool with official Ford Racing calibration,
sent separately after online registration of Pack
DUE TO MULTIPLE CALIBRATIONS, ONLINE
REGISTRATION IS REQUIRED TO RECEIVE
PRO-CAL TOOL AFTER PURCHASE
Pro-Cal tool voucher included with kit
Reduces 1/4-mile ETs up to 1/2 second
50-States “Street Legal” (E.O. #D-598)
|
M-2006-FR2
$1359.00
|
|
 |
2006 MUSTANG GT DRAG PACK
Automatic Transmission
If you feel the need for speed, get the Drag Pack from FRPP. This kit harkens back to the days of big block Ford
power and provides the modular Mustang engine with that same big block performance. With the
DragM-2006-FR2A Pack, you’ll launch harder and accelerate faster while maintaining factory
drivability. Expect to shave 5/10ths off your 1/4-mile ETs with this kit. Drag racing should be conducted at enclosed, dedicated
facilities only. Fits 2005-07 Mustang GT with automatic transmission. See www.fordracingparts.com for 2008
applications
Kit includes:
90 mm Cold Air Kit M-9603-GT06
3.73 ratio Ring and Pinion M-4209-F373N
Gear Installation Kit M-4210-A
Shorty Headers M-9430-S197C
Performance Oil Filter
Premium fuel only
Pro-Cal tool with official Ford Racing calibration,
sent separately after online registration of Pack
DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION
IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE
Pro-Cal tool voucher included with kit
Reduces 1/4-mile ETs up to
1/2 second
50-States “Street Legal”
(E.O. #D-598)
|
M-2006-FR2A
$1190.00
|
|
 |
2005-08 MUSTANG GT SHORT THROW SHIFTER
Designed by Ford Racing and Hurst Standard on Shelby GT Fits 2005-08 Mustang GT with 3650 transmission
Spherical bearing with unique shifter rod and OE main stamping Comes with stalk for stock shift knob and chrome
stalk with white shift knob Urethane body vibration isolators 2% reduction in throw
See www.fordracingparts.com for the most up-to-date warranty information.
|
M-7210-T1
$257.00
|
|
 |
MUSTANG 8.8 RING GEAR AND PINION SET
RATIO 3.73:1
|
M-4209-F373N
$149.00
|
|
 |
MUSTANG 8.8 RING GEAR AND PINION SET
RATIO 4.10:1
|
M-4209-G410A*
$149.00
|
|
 |
8.8 RING & PINION INSTALLATION KIT
Kit includes: pinion and carrier shims, crush sleeve, pinion seal, pinion nut,
ring gear bolts and cover gasket Use for changing ring and pinion gear or differential
Fits IRS
|
M-4210-A
$38.00
|
|
 |
2005-07 MUSTANG GT SHORTY HEADERS
Fits 2005-07 Mustang GT. See www.fordracingparts.com
for 2008 applications 409 stainless steel tubes Machined flange Bolts to stock exhaust pipes
Includes gaskets, bolts and studs
|
M-9430-S197*
$320.00
|
|
 |
2005-07 MUSTANG GT
SHORTY HEADERS
Coated with Jet-Hot® Ceramic Finish
Fits 2005-07 Mustang GT. See www.fordracingparts.com
for 2008 applications 409 stainless steel tubes Machined flange Bolts to stock exhaust pipes
Includes gaskets, bolts and studs |
M-9430-S197C*
$499.00
|
|
| Handling PACK |
|
 |
2005-08 MUSTANG GT COUPE HANDLING PACK
Put a little “Road Race” into your street car!
Fits 2005-08 Mustang GT Coupe Handling Pack includes Dampers M-18000-A, Lowering Springs M-5300-K,
Sway Bars M-5490-A, and Strut Tower Brace M-20201-S197. Strut Tower Brace does not clear
2007-08 with plastic engine cover All components are designed to work together as a package
Lowers car approximately 1.5" Dampers are manufactured by Dynamic Suspensions
(the same company that makes dampers for the FR500C race car) Standard on Shelby GT and GTH
NOTE: Some factory fasteners are one-time use. Please reference Ford service manual for reuse
information and correct torque specifications. |
M-2005-FR3
1225.00
|
|
 |
2005-08 MUSTANG GT COUPE LOWERING SPRING KIT
Progressive spring, designed for increased handling and performance Lowers 2005-08 Mustang GT approximately
1.5" Use with M-18000-A and M-5490-A for optimum performance NOTE: Some factory fasteners are one-time
use. Please reference Ford service manual for reuse information and correct
torque specifications.
|
M-5300-K
$200.000
|
|
 |
2005-08 MUSTANG GT COUPE ANTI-ROLL BAR KIT
Anti-roll bar kit designed for increased handling and performance on 2005-08 Mustang GT Coupe
Best when used with M-18000-A dampers and M-5300-K springs Includes all mounting hardware
NOTE: Some factory fasteners are one-time use. Please reference Ford service
manual for reuse information and correct torque specifications.
|
M-5490-A
$425.00
|
|
 |
2005-08 MUSTANG GT COUPE DYNAMIC DAMPER KIT
Engineered specifically for improved handling on the 2005-08 Mustang Coupe
Dynamic Suspension dampers, same manufacturer as Mustang FR500C race car Unique
FRPP performance tune Designed specifically for lowere vehicles Mustang GT Coupe owners: Use with M-5300-K
and M-5490-A for optimum performance Mustang V6 Coupe owners: Use with M-5300-N and M-5490-C
for optimum performance NOTE: Some factory fasteners are one-time use. Please reference
Ford service manual for reuse information and correct torque specifications.
|
M-18000-A
$430.00
|
|
 |
2005-08 MUSTANG STRUT TOWER BRACE
Fits 2005-08 Mustang GT without plastic engine cover Parallel beam design for added rigidity
Black powder coated Stainless steel Ford Racing emblem Does not fit V-6, supercharged GT or 2007-08 GT with intake shroud
NOTE: Some factory fasteners are one-time use. Please reference Ford service manual for reuse information and
correct torque specifications.
|
M-20201-S197
$175.00
|
|
 |
MUSTANG GT INTAKE SHROUD
Original equipment on 2007-08 Mustang GT Fits all 2005 and up Mustang GT's with 3-valve 4.6L engine
May require 2007 Mustang throttle body studs (W712289 S437) and nuts (W520411 S437)
from Ford Dealer Will not fit with Ford Racing strut tower brace M-20201-S197
|
M-6949-3V
$89.00
|
|
 |
FORD GT START BUTTON KIT FOR MUSTANG
Easy upgrade to enhance the appearance of your 2005-08 Mustang Fits in the existing Power
Point located in the center of the dash Turn the key to the on position then
press the button Red illumination only |
M-11572-GT
$110.00
|
|
 |
2005-08 MUSTANG GT AXLE KIT
2005-08 Mustang GT 8.8 axle assembly 31 spline axles and Trac-Lok differential
3.55 gear ratio Includes axle shafts
|
M-4001-A355*
$1299.00
|
|
| *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part.
|
|
|
|
