Bowling Green Wheelstand 2009

[riccardi]

<a href="http://www.youtube.com/v/dZm_lcqOFhQ&amp;ap=%2526fmt%3D18&amp;rel=0" target="_blank">http://www.youtube.com/v/dZm_lcqOFhQ&amp;ap=%2526fmt%3D18&amp;rel=0</a>

[My08Stang]

I was like, wow, that was quick..lol.. I'm glad it turned out ok

[FS6811]

Hey buddy i missed that pass I was trying to get my car back to the pits to check out my damage, I came by your pits while you were checking yours looked like you were busy so didnt stay long. I was the one who was looking for a driveshaft, mine came out at the 1000ft mark and tore some s*** up too.

[riccardi]

Should have stayed and talked for a while I can talk and work at the same time

[FS6811]

I was tryin to track down some part to see if i could get mine back together and race BUT found out saturday morning that the bell housing was cracked and the block was cracked again so i was s*** out of luck for the weekend.

[riccardi]

What are you running for mounts in your car? Do you have all soild mounts ? Cause if you do we see a ton of that happening nothing can flex we had solid motor mounts with poly trans mount.

[FS6811]

It all started when the drive shaft either broke or one of the u joint cups came out, dont know which happened first, then it just shook the s*** out of eerything, and started breakin stuff. And yes i have solid mounts, when it goes back together it will have better stuff next time. I am learning as i go what will take some abuse and what wont.